Publicité
Les langues disponibles
Les langues disponibles
User Guide
9.2 CONFIGURING THE AUDIO OUTPUTS ON THE REAR
(EXT. OUT CONFIG function)
Thanks to this function, the PROGRAMMABLE OUTPUTS can be configured, so as to manage the
Antiphonal signal (controlled through the AMPLIFICATION tabs), the general signal or just the reverberated
signal of the instrument. Select the EXT. OUT CONFIG. field under the SET-UP menu; this pop-up message
will appear:
which means that the external panning (see par- 9.1) of certain stops might be modified automatically.
Stops placed between outputs [2] and [3] (in organs equipped with 4 outputs) or [8] and [9] (in organs
equipped with 12 outputs), and/or outputs set as GENERAL or REVERB, will be automatically set as
Mono on the first output of the previously configured panning.
Press [EXIT] to abort the automatic panning adjustment and return to the SET-UP menu.
Press [ENTER] to confirm - the display will show:
Functioning of different modes is described in the tables below.
Organs equipped with 4 audio outputs:
MODE
OUTPUTS 1-2
As set in Ext. Router
STANDARD
Conf. function.
GENERAL-REVERB
General signal
Organs equipped with the expansion kit for 12 audio outputs:
MODE
OUTPUTS 1-8
As set in Ext. Router
STANDARD
Conf. function.
As set in Ext. Router
GENERAL-REVERB
Conf. function.
As set in Ext. Router
ANTIPHONAL
Conf. function.
As set in Ext. Router
GENERAL-ANTIPH.
Conf. function.
As set in Ext. Router
ANTIPH.-REVERB
Conf. function.
NOTE
In the models equipped with 4 audio outputs, it is not possible to configure the registers output
router in the EXTERNAL OUT ROUTER function selecting the GENERAL+REVERB outputs mode.
Sonus 60 / 60
Viscount
OUTPUTS 3-4
As set in Ext. Router
Conf. function.
Reverberated signal only
OUTPUTS 9-10
OUTPUTS 11-12
As set in Ext. Router
As set in Ext. Router
Conf. function.
Conf. function.
General signal
Reverberated signal only
As set in Ext. Router
As set in Ext. Router
Conf. function.
Conf. function.
As set in Ext. Router
General signal
Conf. function.
As set in Ext. Router
Reverberated signal only
Conf. function.
55
- 45 / 45
- 40 / 40
Dlx
Dlx
TAB AMPLIFICAT.
TAB AMPLIFICAT.
[CONSOLE ON]
[EXT. SPEAKER ON]
Internal amplification
Outputs 1-8
Outputs 1-8
Outputs 1-8
Outputs 1-8
Dlx
Outputs 1-12
Outputs 9-12
Outputs 9-12
Outputs 9-12
Outputs 9-12
Publicité
Chapitres
