Viscount Sonus 60 Guide De L'utilisateur page 53

User Guide
Here again, there is the option of displaying the alternative voices screen directly by holding out the draw-
stop or holding down the rocker rab for a few moments in the voice on position with the cursor on the
ALTERNATIVE VOICES field in the VOICES menu, or in the function itself.
The LED of the stop being replaced will flash to prevent modification errors; the stop will be on and can be
played for better, quicker adjustment.
The display now shows the list of the alternative voices:
identified as "CURRENT VOICE" in the bottom of the screen.
It should also be remembered that the top of the screen always contains the name screen-printed on the
draw-stop or tab, so that the stop the voice of which is being changed can be identified at all times.
When the [FIELD ] and [FIELD
changes to "ENTER TO REPLACE".
instructing you to press [ENTER] to confirm the new voice and render it usable. The voice on which the
cursor is located is available and can be played even before [ENTER] is pressed, allowing the modification
required to be evaluated immediately. Other stops can also be switched on to assess the overall effect of the
changes.
Press [EXIT] to replace other voices or exit the function.
NOTE:
When an alternative voice is selected, the sound generation parameters in the EDIT PARAMETERS
function are automatically reset to the default values of the new voice. The volume setting (in the
VOLUME LEVEL function) remains unchanged.
Sonus 60 / 60
Viscount
] buttons are used to move the cursor to other voices, the prompt
51
- 45 / 45 - 40 / 40
Dlx Dlx Dlx