Güde GDS 125 A Traduction Du Mode D'emploi D'origine page 25

Make sure the abrasive wheel is fitted properly before
pressing the O Off button.
To make sure the work is safe, use equipment such as
power tool supports, magnifying glass, workpiece holder,
etc.
Removing sawdust and chippings from the machine
when running is strictly prohibited.
Do not use blunt, damaged or distorted circular saw
blades.
Choose the abrasive wheel suitable for the given work-
piece.
Abrasive wheels not corresponding to the characteristics
given in these Operating Instructions may not be used.
The maximum revolutions given on the abrasive wheel
must be respected.
Familiarise with the safety procedures for cleaning,
maintenance and regular removal of sawdust and dust to
reduce the risk of fire.
Make sure the flange used is suitable for the given purpo-
se of use, as specified by the manufacturer.
The power tool must immediately be switched off if it
gets blocked. Unplug the power tool and remove the
stuck workpiece.
At frequent intervals, check the adjustment of the
protection against sparks and set the abrasive wheel
wear properly. Keep the distance between the protection
against sparks and the abrasive wheel small if possible
(max. 2 mm).
At regular intervals, check the workpiece support adjust-
ment and set the abrasive wheel wear properly.
Do not grind with a cold abrasive wheel. Let the abrasive
wheel run idle for one minute before starting your work.
Do not grind on the side surfaces of the wheel. Grind on
the front side only.
Do not apply the coolant directly on the abrasive
wheel. The coolant may affect the adhesion of the abra-
sive wheel and cause its failure.
Abrasive wheel to be levelled on the front side only.
High temperatures are present when grinding. Do
not touch the workpiece before it has sufficiently cooled
down.
ImPORTANT NOTICE
The engine is automatically switched off when overloa-
ded. The engine can be switched on again after it has
cooled down (various times).
Hold the workpieces firmly using the holder (e.g. by pliers)
to prevent injuries.
maintenance
Before carrying out any work on the machine,
disconnect the plug from the socket.
wARNING The machine must not be used under any
circumstances if the machine or the safety devices are
damaged.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
At all times, keep the machine, ventilation slots, in
particular, clean. The sawdust ejection and/or dust ex-
hauster should be cleaned at regular intervals. Never
spray water on the machine!
Use only original accessories and original spare parts.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp
cloth making.
Apply environment-friendly oil to all moving parts.
If necessary, a list of spare parts can be found at www.
guede.com.
Guarantee
warranty period of 12 months applies to commercial
use and 24 months applies to private use and com-
mences on the day of purchase of the device.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be sub-
mitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the ope-
rating and assembly instructions and common wear
are also not included in the guarantee.
Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
we will quickly help you and without needles bure-
aucracy at our web pages at www.guede.com in the
Servicing part. Please help us be able to help you. In
order to identify your device in case of claim we need
the serial No., product No. and year of production. All
this data can be found on the type label. Please enter
it here for future reference
Serial No.
Art. No
Year of production
ENGLISH
25