Energy Saving Tips; Connecting The Cooling Device; Using The Battery Monitor - Mobicool FR 34 Notice D'utilisation

Operation
6.2

Energy saving tips

 Choose a well ventilated location which is protected from direct sunlight.
 Allow warm food to cool down first before placing it in the cooling device
to keep cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooling device open for longer than necessary.
 Defrost the cooling device once a layer of ice forms.
 Avoid unnecessarily low temperatures.
6.3

Connecting the cooling device

The cooling device can be operated with DC or AC voltage.
A
NOTICE! Danger of damage!
Disconnect the cooling device and other consumer units from the
vehicle battery before you connect the vehicle battery to a quick
charging device.
Overvoltage can damage the electronics of the cooling device.
For safety reasons the cooling device is equipped with an electronic system
to prevent the polarity reversal. This protects the cooling device against short-
circuiting when connecting to a battery.
➤ Plug the DC connection cable into the DC socket and connect it to a DC
power socket or ...
➤ ... plug the AC connection cable into the AC voltage socket and connect it
to an AC mains.
➤ Close the covers of the sockets not in use to prevent accidentally touching
the sockets. This also prevents dust, water and dirt from entering the
socket.
6.4

Using the battery monitor

The cooling device is equipped with a multi-level battery monitor that protects
your vehicle battery against excessive discharging when the cooling device is
connected to the DC power supply.
12
FR34, FR40, FR60 AC/DC
EN