Tractel FABA 513708 Instructions D'emploi Et D'entretien page 21

Declaration of conformity
TRACTEL Greifzug GmbH, Scheidt-
bachstraße 19-21, 51469 Bergisch
Gladbach, Germany, the manufactu-
rer, hereby declares that the safety equip-
ment (PPE) described in this manual:
1. Conforms with the provisions listed in
European Directive 89/686/EWG,
2. Is identical with the PPE, which adhe-
res to the EU prototype test certifi cation
and CE-certifi cation issued by a notifi ed
test institute, the "DEKRA EXAM
GmbH, Dinnendahlstraße 9, 44809
Bochum, Germany, Registration No.
0158",
3. Was tested in compliance with stan-
dard EN 353-1:2002 + CNB/P/11.073-
2010.10.13
4. The stipulated testing was subject to
and complies with Article 11A of Direc-
tive 89/686/EWG and was carried out at
a registered certifi cation offi ce:
EXAM GmbH, Dinnendahlstraße 9, 44809
Bochum, Germany, Registration No. 0158.
Product name
The markings on the fall arrest slider include
the following details (Page 3):
A • Read the user manual
B • EN standard 353-1:2002
C • Sticker: next inspection
D • CE-sign (0158)
E • "Up" direction arrow
F • Manufacturer and product designation
G • Serial number
H • Year of manufacture (16 = 2016)
Labelling on the strap fall attenuator:
a • System and manufacturer label
b • Ref. strap fall attenuator and serial no. /
year-calendar week
c • Name
d • Standard related to the fall prevention
device
e • Read the user manual symbol
f • CE label (Testing authority no.)
The FABA™ climbing protection system
complies with standard EN 353-1. It will
be supplied as either a complete climbing
protection ladder (climbing protection
rails with rungs) or as a climbing pro-
tection rail for fi tting to existing ladders
or other manhole steps. The fall arrest
slider is an integral part of the climbing
protection system and together with the
climbing protection rails it forms a pak-
kage of fall arrest systems that safeguard
against falling. Each FABA™ fall arrest
slider has undergone, in conjunction with
suitable guide rails, EU proto type testing
at a registered certifi ca tion offi ce.
The FABA™ fall arrest slider runs in
the climbing protection rail profi le and
it accompanies the user, without any
manual intervention being necessary,
when going up or down and locks in place
automatically in the rail in the event of a
DEKRA
fall. In this case the locking mechanism
on the fall arrest slider locks into one of
the notches in the rail profi le and this
prevents the fall arrest slider from moving
downwards and this action saves the user
from falling.
The FABA™ climbing protection sy-
stem is an integral part of the fall arrest
system that complies with EN 363 and
has to be assembled from the following
components:
1. FABA™ climbing protection rail
(EN 353-1)
2. FABA™ fall arrest slider (EN 353-1)
3. Connector (EN 362)
4. Harness (EN 361)
Function and description
Fall arrest system
EN EN EN EN EN EN
21