IKRA Mogatec EAS 750 Mode D'emploi page 43

8. Technical specifications
Electric branch saw EAS 750
Rated Voltage
Nominal Consumption
No-load Speed
Guide Bar
Cutting length
Variable height adjustment
Working height
Chain speed
Oil
Weight with bar+chain
Chain type
Guide Bar type
Class of Protection
Sound Pressure Level EN ISO 11680-1:2008
Vibration EN ISO 11680-1:2008
Noise emission information in accordance with the German Product Safety Act (ProdSG) and the EC Machine Direc-
tive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will require noise
protection (e.g. wearing of ear protectors).
Wear hearing protection. The influence of noise can cause hearing loss.
Attention!
The vibration value will change on the basis of the area of application of the electric tool and may lie above the
specified value in exceptional situations.
Keep the development of noise and vibration to a minimum!
• Only use properly functioning machines.
• Maintain and clean the machine regularly.
• Adapt your working method to the machine.
• Do not overstress the machine.
• If necessary, have the machine inspected.
• Switch the machine off when it is not in use.
• Wear work gloves.
Attention: Noise protection! Please observe the local regulations when operating your device.
GB | Operating Instructions
230-240 V ~ / 50 Hz
750 W
6000 min
200 mm
ca. 17,5 cm
from 1.90 m to 2.85 m
up to 4.5 m
11 m/s
110 ml
3.4 kg
91PJ033X
080SDEA041
II
90 dB(A)
2,7 m/s
8
-1
K = 3 dB
2
2
K = 1,5 m/s