Connecting The Camera Cable Or Rod; Localisation; Maintenance - Wohler VIS 700 Mode D'emploi

4 Connecting the
camera cable or
rod
5

Localisation

6

Maintenance

Connecting the camera cable or rod

The pan and tilt miniature camera head is con-
nected via a clutch socket with 5 poles to the ca-
ble or the rod.
•
Plug the camera head and camera cable or
the rod together.
•
Turn the thread clockwise for closing the
screw connection tightly for a waterproof con-
nection.
ATTENTION!
Only a tight connection guarantees a waterproof
connection.
The HD- Mini camera head Ø 26 mm is equipped
with a transmitter coil that transmits signals with a
frequency of 9.2 kHZ. These signals can be locat-
ed by the Locator Wöhler L 200. This way it is
possible to locate the exact position of the camera
head in the pipe system.
NOTE!
The transmitter hast to be activated in the camera
menu (setup-menu).
Clean the lens only with a clean damp cloth but
never with cleaning agent.
EN
13