Charging The Battery - Wohler VE 220 Mode D'emploi

Video inspection with the app
4.4

Charging the battery

5 Video inspection with the app
5.1 Loading the app onto an Android smartphone or tablet
Fig. 15 Icon Wöhler Video Endoskop App
6 Connecting the
Wöhler VE 220 to
the mobile terminal
device
26
If the battery voltage is low, the LED of the
ON/OFF-key will flash blue very quickly.
• In this case, charge the device via a USB-C
charging cable.
Connect the USB-C cable to the power supply
•
via the USB-C port on the bottom of the de-
vice.
During the charging process, the LED of the
•
ON/OFF key lights up red. The endoscope
can continue to be used during this time.
Download the free "Wöhler Video Endoskop
•
App" app to your mobile device (smartphone
or tablet) before using it for the first time.
The app is in English.
To be able to use the app, you must connect the
Wöhler VE 220 to the mobile end device. To do
this, proceed as follows:
Switch on the Wöhler VE 220.
•
The device will now set up its own WLAN network.
Go to the WLAN settings of your mobile de-
•
vice.
There you will now see the Wöhler VE 220 as
"WIFI Cam".