Installing The Main Unit; Installation Notes - Pioneer AVIC-505 Manuel D'installation

Installation

Installing the main unit

Installation notes

• Do not install the main unit in places where it may become subject to high temperatures
or humidity, such as:
* Places close to a heater outlet.
* Places exposed to direct sunlight, such as on top of the dashboard or the rear shelf.
• Places that may be splashed by rain, for example close to the door.
• The installation strength will depend on the vehicle model and the installation position.
Choose a position where the main unit can be firmly installed, and install it securely.
If the main unit is not securely fastened, the errors in location display will be greater.
• Do not install the main unit on the board covering the spare tyre or other places which
are subject to vibration.
• When the main unit is installed under a front seat, ensure that it does not obstruct the
sliding action of the seat.
• Do not install the main unit where it will be under luggage. Strong mechanical shock to
the main unit would increase the errors in location display.
• Avoid installing the main unit in places where it will interfere with loading and unload-
ing of the spare tyre, jack, tools, etc.
• Check that a CD-ROM can be ejected with the main unit installed.
• Install the main unit on a surface with-
in 10º tolerance. A surface tilted more
than this would increase the errors in
location display.
• If you use the mobile navigation system out of areas where PIONEER is permitted, your
position is not shown properly.
13
10˚