Installing The Display Unit And Hide-Away Unit; Installation Notes - Pioneer AVIC-N3 Manuel D'installation

Table des Matières

Les langues disponibles

Installation

Installing the display unit and Hide-away unit

• Do not install the display unit or Hide-away unit in places where it may become subject

to high temperatures or humidity, such as:

* Places close to a heater, vent or air conditioner.

* Places exposed to direct sunlight, such as on top of the dashboard or the rear shelf.

* Places that may be splashed by rain, for example close to the door.

• Install this product in an area strong enough to bear its weight. Choose positions where

the display unit or Hide-away unit can be firmly installed, and install it securely.

If the display unit or Hide-away unit are not securely installed, the current location of

the vehicle cannot be displayed correctly.

• Do not install the Hide-away unit on the board covering the spare tire or other places

which are subject to vibration.

• When the Hide-away unit is installed under a front seat, ensure that it does not obstruct

the sliding action of the seat.

• When installing the Hide-away unit, choose a position that ensures there will be no con-

tact with luggage. The impact of a heavy weight or sudden shock on the Hide-away unit

will adversely affect the accurate display of the current location of the vehicle.

• Avoid installing the Hide-away unit in places where it will interfere with loading and

unloading of the spare tire, jack, tools, etc.

• Check that a disc can be ejected with the display unit installed.

• Install the Hide-away unit horizontally on a surface within +30 degrees to –30 degrees

tolerance (within five degrees to the left or right of your vehicle's direction of travel).

Mis-installing the unit with the surface tilted more than these tolerances would increase

the potential for errors in the location display, and might otherwise cause reduced dis-

play performance.

5°

• If installation angle exceeds 30º from horizontal, the display unit might not give its opti-

mum performance.

30°

Table des Matières

Table des Matières