Connecting The Main Unit To The Face Panel; Connecting To Separately Sold Power Amp - Pioneer AVIC-EVO1 Manuel D'installation

Connecting the main
unit to the face panel
To operate the main unit using the
button on the face panel, the control
cable between the face panel and the
main unit must be connected. (For certain
vehicle types, it is initially connected.)
The position of the connector on the
main unit varies depending on the
vehicle type.

Connecting to separately sold power amp

23 cm
Rear outputs
(REAR OUTPUT)
23 cm
Front outputs
(FRONT OUTPUT)
15 cm
Subwoofer outputs
(SUBWOOFER OUTPUT)
This product
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
System remote control
If your vehicle is equipped
with an auto-aerial, connect
this lead to a power amp.
Subwoofer
NOTES
• You can change the RCA output of the subwoofer depending on your subwoofer system. (Refer to
Operation Manual.)
• The subwoofer output of this product is monaural.
Power amp
(sold separately)
RCA cables
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Power
supply
Power cord
Front speaker Rear speaker
7
En