Ensure Safety - WAGNER Super Finish 23 Select Mode D'emploi

Masquer les pouces Voir aussi pour Super Finish 23 Select:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB
Translation of the original operating instructions
Airless units develop extremely high spray pressures.
Never bring fingers, hands or other body parts into contact with the spray jet!
1
Never point the spray gun at yourself, other persons or animals.
Never use the spray gun without spray jet safety guard.
Do not treat a spray injury as a harmless cut. In case of injury to the skin by coating material
or solvents, consult a doctor for quick and correct treatment. Inform the doctor about the
coating material or solvent used.
The following points are to be observed in accordance with the operating manual
2
before every start-up:
1. Faulty units may not be used.
2. Secure a Wagner spray gun with the securing lever at the trigger guard.
3. Ensure earthing.
4. Check the permissible operating pressure of the high-pressure hose and spray gun.
5. Check all the connecting parts for leaks.
Instructions for regular cleaning and maintenance of the unit are to be observed
3
strictly.
Observe the following rules before any work on the unit and at every working
break:
1. Relieve the pressure from the spray gun and high-pressure hose.
2. Secure a Wagner spray gun with the securing lever at the trigger guard
3. Switch the unit off.
34
WARNING!
Attention, danger of injury by injection!

Ensure safety!

Super Finish 23 Select

Publicité

Table des Matières
loading

Table des Matières