Replacing The Instrument - Dentsply Sirona Midwest E Pro Notice D'utilisation

5 Operation
38
Operating Instructions Midwest
5.1

Replacing the instrument

CAUTION! The instrument should only be fitted or removed when
the motor is at standstill.
NOTICE! Do not use instruments with fiber optics on motors that do not
have fiber optics.
Attaching the instrument
Instrument general (LINE Basis)
✔ The motor is at a standstill.
with ISO slider
1. Insert the instrument until it snaps into place.
2. When using a motor with a light groove (A): turn the instrument until
the ISO slider clicks into place.
Removing the instrument
Remove _ instrument
✔ The motor is at a standstill.
➢ Detach the instrument. Do not pull on the supply hose while doing
this.
® ®
E Pro / Midwest E Plus / Midwest
66 04 206 D3686.201.01.04.02
®
E mini