Time-Controlled Activation; Time-Controlled Arming - Bosch IUI-UEZ-BE1000s Manuel D'utilisation

Time-controlled activation

Time-controlled arming

Description
The exit delay time must be entered by the
safety company in charge. Not in compliance
with VdS.
There are ______ seconds available for exit-
ing the premises before the system is armed.
15 : 13 22.11.2005
MENU
Procedure
1. Call up the input field for time-controlled
arming. Press the center
The input field for the time-controlled arm-
ing code will be displayed.
ID:0 CO:
AREA PROG.
2. Start time-controlled arming.
Enter ID (1 to 3 digits) for ID 7, e.g. enter
007. Enter code (0 to 6 digits), e.g. 123123;
time-controlled arming starts automatically
after entry of the digits. Only press the
"ENTER" key if the code is < 6 digits.
ID: 007 CO:
_ _ _ _ _ _
AREA PROG.
3. Time-controlled arming is activated.
4. Time-controlled arming is active.
key.
- 9 -
The delay time has started. The buzzer will
sound during the exit delay time. The room
must be exited within the programmed time
of ... seconds.
ARMED IN . . . . . s
CANCEL
The left key can be used to cancel the
arming procedure if needed.
After the door is closed, the system is
armed, which is indicated by a buzzer
sound of 3 seconds. The following mes-
sage will appear on the display.
AREA
ARMED