Message Display/Processing - Bosch IUI-UEZ-BE1000s Manuel D'utilisation

Message display/processing

Description
Example: there are a total of 3 messages (de-
tector zones) pending that are message type
e.g. "INTRUSION". If multiple message types
are pending, they are displayed according to
their priority.
03 INTRUS. EXT
MENU
Procedure
1. Call up the next message type. Press the
right key.
The right key can be used to call up
additional message types (e.g. "FAULT").
02 FAULT
MENU
2. Call up the message for the message type
selected. Press the "ENTER" key.
The chronologically first message (1) will
be displayed along with the detector zone
(no. 0001) and the detector (no. 02).
1 FAULT 0001-02
MESSAGE ? DETEC
3. Call up additional messages. Press the left
key.
The messages (detector zones) for the
message type selected can be called up
with the left key. The messages are
displayed consecutively according to their
chronological order e.g. detector zone
(no. 0033) along with the detector (no. 07).
2 FAULT 0033-07
MESSAGE ? DETEC
4. Call up additional detectors. Press the right
key.
The next triggered detector (no. 14) in the
detector zone (no. 0033) will be displayed
in the first line.
2 FAULT
MESSAGE ? DETEC
5. Call up additional information. Press the
center key.
The additional information (e.g. staircase)
will be displayed in plain text for approxi-
mately 3 seconds. For units networked us-
ing SRT, the unit number is displayed for
an additional 3 seconds. The display then
returns to the previous display.
1 FAULT
STAIRCASE
- 6 -
0033-14
0001-02