Display/Control Elements; Explanation Of Message Display - Bosch IUI-UEZ-BE1000s Manuel D'utilisation

Display/control elements

Explanation of message display

1
A B C
4
J K L
7
S T U
Display for operation
The display lights up when the unit is
ready for operation.
Cumulative display for alarms (red LED).
The display lights up in the event of an ex-
ternal or internal alarm, a pre-alarm, or a
fault with external
The corresponding alarm is saved and in-
dicated by the buzzer.
General display for faults (yellow LED).
The display lights up for all types of faults.
The corresponding fault message is saved
and indicated by the buzzer. If the type of
fault cannot be reset by the authorized
user, 24-hour service must be informed.
15 : 13 22.11.2005
MENU
2 3
D E F G H I STOP
5 6
M N O P Q R ENTER
0
8 9
V W X Y Z
./:
(green LED).
alarm signaling.
Display (LCD): The display consists of
2 lines with 16 characters. All pending mes-
sages as well as the notes for operation are
displayed in the menu in plain text. If the key-
pad is in standby mode, i.e. there are no
messages and no functions have been called
up from the menu, then the current time, the
date, as well as access via the center vari-
able function key in the menu will appear.
03 HOLD UP
MENU
Number of messages
Type of message
3 HO UP
MESSAGE? DETEC.
Number of the current message
Type of message
Detector zone number
Detector number of the detector zone
- 4 -
0012-6