Titan HKE-L Notice D'instructions page 23

4.
If necessary, tighten the great
strap loop. The left hand pulls the
strap loop, the right hand grasps
the lifting Rocker 509.
5.
The right hand grasps the tension
lever 508 and moves it back and
forth to obtain the desired strap
tension. At the same time the left
hand holds the cutting lever 35.
6.
After having reached the desired
strap tension bring tension lever
508 back into its initial position.
The right hand remains there and
provides support for the joining
process. The TITAN "No-seal" joint
is formed by pushing the cutting
lever 35 forwards rapidly with the
left hand until it strikes against the
case;
simultaneously
behind the joint.
7.
Bring tension lever 508 back into
its initial position. Grasp and press
together rocker 509 with cutting
lever 35. Withdraw the tool from
the package by a rotary movement
to the right side.
HKE-L
the steel strap
cut off directly
H 223 EU 21/06
is
23 / 47