Backrest Upholstery; Footrest Supports - Invacare Alu Lite Manuel D'utilisation

Always make sure that the backrest is properly locked
in place before the user settles down in the wheelchair to
prevent any injuries !

2.1.3 Backrest upholstery

• The padded backrest provides excellent daily comfort for
the user who does not need specific support for the upper
body.
In the event that the upholstered backrest slackens, ask for
a replacement from your Dealer.

2.1.4 Footrest supports

- Standard footrest supports (photo 2) swing away during
transfers and can be removed during transport.
Operate lever (A) by pushing sideways and swivelling towards
outside. To return to the initial position, align the footrest
support it locks automatically.
1
A
1A
To remove the footrest support, simply pull up after
unlocking the assembly.
To refit it, align the holes on the side mounting with the
support and press on, while still in the unlocked position
- Footrests (photo 3) : the footplate can be lifted during
transfers footrests are height adjustable. Loosen the screw
(B) to adjust to the desired height, firmly tighten the screw
after adjustment.
Straps for standard legrest : to ensure a good position of the
feet.
Note : the standard footrest supports and legrests are
mounted in pairs on the wheelchair; whenever you remove
them, remember that you have a right side and a left side !
Never lift the wheelchair by the footrest supports or
legrests !
Keep your fingers away from movable parts during folding,
disassembling or adjustment to prevent injuries !
A
2
B
3
15