Fastening Frame; Installation Manual - Dometic CoolAir SP950C Instructions De Montage

General safety instructions
Please carefully read and follow all instructions, guidelines and warnings included in this product manual in order to ensure that you install,
use and maintain the product properly at all times.
By using the product, you hereby confirm that you have read this disclaimer, all instructions, guidelines and warnings carefully and that you
understand and agree to abide by the terms and conditions as set forth herein.
You agree to use this product only for the intended purpose and application and in accordance with the instructions, guidelines and warnings
as set forth in this product manual as well as in accordance with all applicable laws and regulations.
A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and others, damage to your product
or damage to other property in the vicinity.
Dometic accepts no liability for any loss, damage or injury incurred, directly or indirectly, from the installation, use or maintenance of the
product not in compliance with the instructions and warnings in the product manual.
This product manual, including the instructions, guidelines and warnings, and related documentation may be subject to changes and
updates. For up-to-date product information, please visit: documents.dometic.com, dometic.com.
1 General safety instructions
The manufacturer accepts no liability for damage in the following cases:
• Damage to the product resulting from mechanical influences and incorrect
connection voltage
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in the operating manual
A
NOTICE!
The freedom of movement of semi-trailers (of the outer edges of the
semi-trailer when turning or jackknifing) and other vehicle attachments
must not be restricted.
I
NOTE
Observe the safety instructions in the installation manual for the parking
cooler.
2 Scope of delivery
Installation kit for Volvo FH
Quantity Designation
1

Fastening frame

1

Installation manual

12 Retainer nut M8
4 Bolt M8 x 35
16 U washer M8 (d1 = 8.4 mm, d2 = 16 mm)
4 U washer M8 (d1 = 8.4 mm, d2 = 24 mm)
6
CoolAir SP950C, SPX1200C
EN