Contents
generAl inForMAtion
oPeration
1.
General information ������������������������������������������ 14
1.1 Key �������������������������������������������������������������������� 14
2.
3.
3.1 Operation ����������������������������������������������������������� 18
4.
4.2 Test symbol ��������������������������������������������������������� 19
5.
6.
What to do if ... ����������������������������������������������� 19
installation
7.
Installation ���������������������������������������������������� 19
7.3 Fittings��������������������������������������������������������������� 19
F
14
|DHF C
������������������������������������������ 21
operAtion
1.
General information
The chapter operation is intended for users and contractors.
The chapter installation is intended for contractors.
Please read carefully
!
Read these instructions carefully before using the
appliance and retain them for future reference. If the
appliance is passed on to a third party please hand
these instructions to the new user.
1.1
Key
In this documentation you will come across symbols and highlights
that are defined as follows:
1.1.1 symbols in this documentation
Risk of injury
Information regarding possible risks of injury for
installer or users and potential equipment damage.
Danger to life through electrocution!
Risk of scalding!
Risk of damage!
!
Information regarding potentially dangerous
situations that might occur during the appliance
installation or operation, the consequences of which
may be damage to the appliance, environmental
pollution or material loss.
Please read carefully
!
Read this section carefully.
Passages with this symbol "»" indicate step-by-step procedures
»
you must carry out.
- Passages with this symbol "
1.1.2 symbols on the appliance
Disposal
Appliances with this marking are unsuitable for
general waste disposal and should therefore be
disposed of separately.
-
" indicate lists.
www.stiebel-eltron.CoM