VOLTCRAFT VC-420 Mode D'emploi page 40

Symbol for the diode test
Symbol for the acoustic continuity tester
CAP Symbol for the capacity measurement range
Temp Symbol for the temperature measurement range
AC Symbol for alternating current
DC Symbol for direct current
COM Measuring connection reference potential
- Polarity indication for current flow direction (minus pole)
mV Millivolt (exp.-3)
V Volt (unit of electric voltage)
A Ampere (unit of electric current)
mA Milliampere (exp.-3)
µA Microampere (exp.-6)
Hz Hertz (unit of frequency)
kHz Kilo Hertz (exp.3)
MHz Mega Hertz (exp.6)
Ω Ohm (unit of electric resistance)
kΩ Kilo Ohm (exp.3)
MΩ Mega Ohm (exp.6)
nF Nanofarad (exp.-9; unit of electric capacity)
µF Microfarad (exp.-6)
% Display of the pulse duration ratio of the positive half-wave in percent (pulse-pause ratio)
°C°F Degrees Celsius/degrees Fahrenheit (unit for the temperature)
APO Automatic deactivation is activated
Bar chart, analogue bar display for the digital value
Symbol for the fuses used
40