USB Device
Listening to music of
an USB device
You can connect an optional USB device
(Digital music player or USB storage
media) to the
(USB) port
unit and listen to music stored in the
USB device. See "Playable USB devices
and Bluetooth devices" (page 101) for a
list of USB devices that can be connected
to this system.
The audio formats that can be played
back by this system are as follows:
ATRAC/MP3*/WMA*/AAC*
* Files with copyright protection (Digital
Rights Management) cannot be played by
this system.
Files downloaded from an online music store
may not be played by this system.
1
Select the USB function.
Press FUNCTION +/
to select "USB".
2
Connect an optional USB device
(Digital music player or USB
storage media) to the
port
as shown below.
When USB cable connection is necessary,
connect the USB cable supplied with the
USB device to be connected.
See the operation manual supplied with
the USB device to be connected for
details on the operation method.
When the USB device is connected, the
display changes as follows:
"Reading" "ATRAC AD
"StorageDrive
on the
1)
2)
Note
It may take about 10 seconds before "Reading"
appears depending on the type of USB device
connected.
3
4
repeatedly
(USB)
USB device (Digital
music player or USB
storage media)
"
2)
When connecting a digital music player.
When connecting USB storage media. The
volume label is displayed next if recorded.
Start playback.
Press
(or USB
unit).
Adjust the volume.
Press VOLUME +/ .
" or
1)
on the
Continued
65
GB