Sony CMT-DH5BT Mode D'emploi page 55

Setting playback options  CUSTOM
SETUP
Set up playback related and other
settings.
PAUSE MODE
(DVD VIDEO and DVD-R/-RW in VR
mode only)
AUTO: The picture, including subjects
that move dynamically, is output with no
jitter. Normally select this position.
FRAME: The picture, including subjects
that do not move dynamically, is output
in high resolution.
TRACK SELECTION
(DVD VIDEO only) Gives priority to the
sound track which contains the highest
number of channels when you play back
a DVD VIDEO on which multiple audio
(PCM, DTS, MPEG audio, or Dolby
Digital) formats are recorded.
1)
OFF: No priority given.
AUTO : Priority given.
2)
MULTI-DISC RESUME
(DVD VIDEO and VIDEO CD only)
ON: Stores the resume playback point in
the memory for up to 40 discs.
OFF: Does not store the resume playback
point in the memory. Playback starts at
the resume playback point only for the
current disc in the system.
AUDIO DRC (Dynamic Range
)
Compression)
(DVD VIDEO and DVD-R/-RW in VR
mode only)
OFF: No compression of dynamic range.
STANDARD: Reproduces the sound
track with the kind of dynamic range that
the recording engineer intended. Useful
for watching movies at low volume late
at night.
MAX: Narrows the dynamic range fully.
1) If each audio sound track has the same
number of channels, the system selects the
audio sound tracks in the order from PCM,
DTS, Dolby Digital, to MPEG.
2) When you set "TRACK SELECTION" to
"AUTO, " the language may change. The
"TRACK SELECTION" setting has higher
priority than the "AUDIO" settings in
"LANGUAGE SETUP". However, depending
on the disc, this function may not be
performed.
3) AUDIO DRC can only be performed with
Dolby Digital sources.

GB