Dell LSI21320-IS Guide De Démarrage Rapide page 22

Quick_Start_Guide_IS.book Page 24 Thursday, May 15, 2003 4:53 PM
24
Integrated Striping Quick Start Guide
Click the button. Move to Settings-->Control Panel and click.
2
Start
Double click SCSI Adapters.
3
Click the Drivers tab.
4
Click Add.
5
A list of installed adapters appears.
Click the Have Disk button.
6
When prompted, insert the LSI21320 driver diskette.
Enter or type the path to copy the manufacturer's files from:
7
A:\NT
Select OK.
The Install Driver menu should have the driver name
PCI SCSI/FC MPI Driver Install Disk"
If it is not highlighted, select it. Choose OK.
8
At this point, the following message may occur:
"The driver for this SCSI Adapter is already on
the system. Do you want to use the currently
installed driver or install new ones?"
Selecting Current uses the driver already on the system, and
selecting New uses the driver on the diskette.
Choose New unless you want to use the older version already on the
9
system. If you chose Current, go to step 11.
Verify if the path to the OEM SCSI Adapter files reads:
10
A:\NT
If not, enter or type it as shown above. Select Continue.
Remove the diskette from your A: drive.
11
The System Settings Change message displays:
"You must restart your computer before the new
settings take effect. Do you want to restart your
computer now?"
Click the Yes button to restart and reboot Windows NT 4.0.
12
"LSI Logic
highlighted.