Kübler CODIX 923 Mode D'emploi page 38

Set value
Set value can be programmed
from 000000 to 999999
A previously programmed
decimal point will be displayed
Display colour (for 6.92x.x1x3.xx0]
Display colour
upper line
lower line
Display colour
upper line
lower line
7.8.6.4
Mainmenu for reset mode
Setting the reset mode
Manual reset (with red key) and
electrical reset (reset input)
No reset possible (red key and
reset input inhibited)
Only electrical reset possible
(reset input)
Only manual reset possible (red
key)
7.8.6.5
Mainmenu for Preset
Mainmenu for the preset
ADD mode output operations:
permanent signal at the output,
becomes active when count >
preset
SUB mode output operations:
permanent signal at the output,
becomes active when count < 0
ADD mode output operations:
permanent signal at the output,
becomes passive when count >
preset
Page 14
red
red
red
green
SUB mode output operations:
permanent signal at the output,
becomes passive when count < 0
ADD mode output operations:
timed signal at the output,
becomes active when count >
preset. (Activation only in positive
direction)
SUB mode output operations:
timed signal at the output,
becomes active when count < 0.
(Activation only in negative
direction)
ADD mode output operations:
timed signal at the output,
becomes passive when count >
preset. (Deactivation only in
positive direction)
SUB mode output operations:
timed signal at the output,
becomes passive when count <
0. (Deactivation only in negative
direction).
ADD mode output operations:
timed signal at the output,
becomes active with positive
direction and when count >
preset and subsequently active
with negative direction and when
count < preset
SUB mode output operations:
timed signal at output, becomes
active with negative direction and
when count < 0 and
subsequently active with positive
direction and when count > 0
ADD mode output operations:
timed signal at the output,
becomes passive with positive
direction and when count >
preset and subsequently passive
with negative direction and when
count < preset
SUB mode output operations:
timed signal at the output,
becomes passive with negative
direction and when count < 0 and
subsequently passive with
positive direction and when count
> 0
Duration of timed signal,
programmable from 00.01 to
99.99 s.
Timed signal is post-triggered
www.kuebler.com