Editing The Entire Disc (Disc Edit); Overview; Erasing The Disc Contents (Disc Erase) - Sony MDM-X4 Mode D'emploi

Editing the Entire Disc (Disc Edit)

Overview

This chapter shows you how to erase all the
information on the disc and how to assign a disc name.
The following is a list of disc editing functions :
• Disc Erase (for erasing a disc) n page 50
• Disc Name (for naming a disc) n page 51
50 EN
Erasing the Disc Contents (Disc
Erase)
This function erases the entire disc. Both the recorded
audio data and the disc name will be erased.
1
5
1
Press EDIT.
[EDIT] appears in the display.
2
Turn the jog dial so that "Disc Erase" appears in
the display.
The name of the edit function starts blinking in
the display.
3
Press ENTER.
"OK?" appears in the display.
D s c E r s , O K ?
4
Press ENTER again.
The contents of the disc are erased.
5
Press EXIT.
This completes the edit operation.
Note
Since this operation cannot be undone, be sure to check the
contents of the disc beforehand.
3,4
2