Sony MDM-X4 Mode D'emploi page 54

Synchronization with MIDI Equipment
3
Press ENTER.
The tempo map setting display appears.
0 1 : - - - - - - -
Note
If you do not want to change the tempo information,
leave the tempo information numbers blank.
4
Press ENTER again.
The indication for the tempo change position
starts blinking.
Tempo map 1 can only be set to the first bar.
5
Turn the jog dial to display 0001.
The units in the display represent bars.
If you hold down SHIFT while turning the jog
dial you can specify the tempo change position in
16th note units within the respective bar.
0 1 : 0 0 0 1 1 2 0
Note
If you do not want to change the tempo information,
leave the tempo information numbers blank.
6
Press ENTER.
The indication for the tempo starts to blink.
7
Turn the jog dial to display 120.
0 1 : 0 0 0 1 1 2 0
8
Press ENTER.
The time setting display appears.
9
Use the jog dial and ENTER to display 04/04.
0 1 : 0 4 / 0 4
10
Press ENTER again when finished.
The tempo map number blinks.
54 EN
Tempo
Tempo change position
Tempo map number (blinking)
Blinking
Blinking
11
Turn the jog dial to display 02.
0 2 : - - - - - - -
12
Repeat steps 3~9 to create the new tempo map.
When the tempo map is complete, the settings are
displayed in order automatically starting from the
first tempo change position.
To complete construction of the tempo map
Press EXIT repeatedly until the EDIT display
disappears from the display.
Notes
• The time setting is only possible at the beginning of each
bar.
• You can assign up to 50 tempo maps to each song. The
tempo information can be stored on the disc, but since
there is a limited amount of memory on each disc it may
not be possible to store 50 tempo maps for each song if
there are several songs on a disc. In this case "Tempo Full"
will appear in the display when you select the tempo map
number.
• Due to the nature of the MD system, MIDI clock
information cannot be output and tempo information
cannot be stored when using standard music MD discs.
Deleting a tempo map
Use the following operations to delete tempo maps
which are no longer necessary. The tempo map
numbers located after the tempo map which was
deleted are brought forward automatically.
EXAMPLE: Erasing tempo map 5.
1
Press EDIT.
[EDIT] appears in the display.
2
Turn the jog dial so that "Song Tempo" appears in
the display.
The name of the edit function starts blinking in
the display.
3
Press ENTER.
The tempo map setting display appears.
4
Turn the jog dial to display tempo map 05.
0 5 : 0 0 1 8 1 0 0
Blinking