Batteries - SURE petcare SureFeed Sealed Pet Bowl Guide D'utilisation

Batteries

Always use 4 good quality 1.5V alkaline C cell batteries. This will ensure the best
performance of your Sealed Pet Bowl. This product is not designed for use with
rechargeable batteries. To insert or change the batteries please follow the steps below:
The red battery light will flash if the batteries are low, or if there's a problem with how
they have been inserted.
1
Make sure the product is turned off
then turn it upside down to access the
battery compartments.
3
+
-
Insert the batteries. Ensure the +/-
symbols on the batteries match the
symbols on the unit itself.
5
Place the Pet Bowl in its intended
location and then turn it on. This is so
the sensors can correctly calibrate.
2
Remove the battery covers.
4
+
-
6
After the Pet Bowl is turned on the
sensors need to calibrate. The buttons
will light up and the lid may open.
Replace the battery covers.
EN
4