Fault Messages - Dräger X-zone 5000 Notice D'utilisation

Fault messages

Special symbol » « and
displayed numerical code:
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23 - 28
29
30
31
32
42
Cause
Dräger X-am 5000 with alkali supply unit. Insert Dräger X-am 5000 with battery
Communication with Dräger X-zone 5000
interrupted.
Communication error with battery
controller Dräger X-zone 5000.
Main battery alarm Dräger X-am 5000.
Battery pre-alarm Dräger X-am 5000.
Dräger X-am 5000 charging current too
low.
Holder (pump) detected, but no pump
fitted.
Flow fault
Holder status change (pump) during
operation.
Check sum error program code
Check sum error operating parameter
Check sum error operating parameter
Check sum error operating parameter
Working memory test error
Faulty ADC conversion.
No contact with switch box in grouping
mode.
Charging electronics faulty.
Battery completely discharged.
Battery main alarm of the
Dräger X-zone 5000.
Battery pre-alarm of the
Dräger X-zone 5000.
Dräger X-am 5000 device error.
Dräger X-am 5000 alarm pattern faulty.
-
Battery main alarm
Battery completely discharged.
Charging electronics faulty.
Communication error with battery
controller Dräger X-zone 5000.
Remedy
power pack.
Check IR interface on Dräger X-zone
5000 and on Dräger X-am 5000.
Contact Dräger.
Check charging contacts on
Dräger X-zone 5000 and on
Dräger X-am 5000.
Check charging contacts on
Dräger X-zone 5000 and on
Dräger X-am 5000.
Check charging contacts on
Dräger X-zone 5000 and on
Dräger X-am 5000.
Use holder for diffusion mode.
Check intake hose.
Check that the holder (pump) is securely
positioned.
Contact Dräger.
Contact Dräger.
Contact Dräger.
Contact Dräger.
Contact Dräger.
Contact Dräger.
Check wireless connection to switch box.
Contact Dräger.
Charge Dräger X-zone 5000.
Charge Dräger X-zone 5000.
Charge Dräger X-zone 5000.
Check Dräger X-am 5000.
Contact Dräger.
-
Charge Dräger X-zone 5000.
Charge Dräger X-zone 5000.
Contact Dräger.
Contact Dräger.