Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Display
Residual heat indicator
Warning!
The risk of burns from
residual heat!
DAILY USE
Activation and deactivation
Touch
for 1 second to activate or deac-
tivate the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
• You do not set the heat setting after you
activate the appliance.
• You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). An acoustic
signal sound some time and the appli-
ance deactivates. Remove the object or
clean the control panel.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deacti-
vates. See below.
• The relation between heat setting and
times of the Automatic Switch Off func-
tion:
•
,
-
— 6 hours
•
-
— 5 hours
•
— 4 hours
•
-
— 1.5 hours
The heat setting
Touch
to increase the heat setting.
Touch
to decrease the heat setting. The
display shows the heat setting. Touch
and
at the same time to deactivate the
cooking zone.
There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / The Child Safety Device operates.
The Automatic Switch Off operates.
).
Description
Activation and deactivation of the outer
ring
You can adjust the surface you cook to the
dimension of the cookware.
To activate the outer ring touch the sensor
field
. The indicator comes on.
Do the procedure again to deactivate the
outer ring. The indicator goes out.
Timer
Count Down Timer
Use the Count Down Timer to set how long
the cooking zone operates for only this one
time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate or change the Timer:
touch
or
of the timer to set the time
00
99
(
-
minutes). When the indicator
of the cooking zone starts to flash slow,
the time counts down.
• To deactivate the Timer: set the cook-
ing zone with
vate the Timer. The remaining time
00
counts back to
cooking zone goes out.
• To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
When the time comes to an end, the sound
00
operates and
flashes. The cooking zone
deactivates.
progress 17
and touch
to deacti-
. The indicator of the
. The indicator of
Publicité
Chapitres
Table des Matières
