Bluetooth Wireless Interfaces; Bluetooth Settings - Discoverable; Operation Mode - Amprobe AT-5000 Mode D'emploi

• Push any button to return to the previous menu

BLUETooTH WIRELESS INTERfACES

The AT-5000 Bluetooth wireless feature allows the operator to transmit data from the T-5000 transmitter to the R-5000 Receiver
or another Bluetooth-enabled device such as a computer.
Data and digital photos can be saved in memory and transferred via Bluetooth wireless communication to laptop computers or
PCs. The reverse is also available - locate ticket information and digital photos may be loaded into the R-5000 memory.
To access the Bluetooth menu, use the 4-way navigation button (R-5000) or the three-button navigational keypad (T-5000) to
highlight the Bluetooth icon. The chosen menu is also labeled at the top of the menu screen.
Press the <Select> soft key to open the desired menu screen. Press <Back> to return to the operational interface. Use the 4-way
navigation button (R-5000) or the three-button navigational keypad (T-5000) to select another menu.
Bluetooth Settings – discoverable
Select Discoverable on the T-5000 transmitter or the R-5000 receiver to configure both the transmitter and the receiver's wireless
Bluetooth transmission feature. If activated, the transmitter or the receiver automatically searches for surrounding Bluetooth-
enabled devices.
The Discoverable state feature is configured using the three-button navigational keypad on the T-5000 or the 4-way navigation
button on the R-5000. Press the up/down and left/right arrows to select the Discoverable option. Press <Select> to activate the
desired setting. The transmitter or the receiver automatically returns to the operational display screen.
T-5000 discoverable R-5000 discoverable

operation Mode

The operation mode sets the data transmission selection – Bluetooth, RS232, or either option. Selecting Auto allows receiver
connections via the RS232 cable or via Bluetooth. If the RS232 cable is connected, Bluetooth is not available. Selecting ON allows
connection with Bluetooth only. Selecting OFF turns the Bluetooth feature off. The default setting is Auto for the R-5000.
Use the 4-way navigation button to move up and down the Bluetooth Settings list. Use the 4-way navigation button to move
right and highlight the options. Press the <Select> soft key to choose the option. Press the <Back> soft key to return to the
previous interface.
25