R-5000 Lcd Display Indicators - Amprobe AT-5000 Mode D'emploi

R-5000 LCd display indicators

The color graphical display shows intuitive icons used to aid in accurate locating by the user.
display Icon
Battery Level
Signal
Select™
Guidance
Compass™
Distortion
Alert™
Frequency
Locate Mode
Signal Gain
Mode
Speaker
Volume
Bluetooth
RS232
GPS
description
Displayed as a continuous level from a full 100% charge to 0%.
Displayed when activated in direct (conductive) connection or Signal Select
Clamp mode. This icon alerts the user if the receiver detects Signal Select
modulation.
A single graphical icon that implements three tools aiding locating accuracy –
signal select, distortion alert, and line guidance.
The Distortion Alert, displayed as a red-filling or emptying circle, denotes when
a non-ideal magnetic field is detected.
The active frequency, or the passive band name (power or RF), is always
displayed on the top left of the display.
In Sonde locate mode, the active mode is displayed on the top left of the
display. Otherwise, line locate mode is active.
Indicates Auto or Manual signal strength mode. In auto mode, signal strength
is measured in decibels (dB). The auto gain mode can be readjusted pressing
Auto
the 4-way navigation button up. Manual gain is displayed in a linear scale from
000 to 999. The manual gain can be increased or decreased by pressing the
Man
4-way navigation button right or left, respectively. Manual gain is displayed in
a linear scale from 000 to 999.
Indicates the speaker volume setting - from off to high.
Indicates an active Bluetooth connection.
Appears when a host serial cable is connected to R-5000 receiver.
Indicates the receiver can receive signals from 3 or more satellites (optional).
Not available for AT-5000
16