Settings Menu - Amprobe AT-5000 Mode D'emploi

SETTINGS MENU

The following options are available: Personalise, Audio, Initial Setup, Tools, Supervisor, Preset State, and About.
• Push the 4-way navigation button (up/Down/Left/Right) to highlight the Mode menu.
• Push the Select button to open the Settings menu
• Push the 4-way navigation button (Up or Down) to highlight a desired setting mode.
• Push the 4-way navigation button (right) to highlight an option
• Push the 4-way navigation button (Up or Down) to toggle through the options.
• Push Select button to activate or deactivate an option
• Push Back to return to the previous menu interface
Personalise
The personalize menu gives you the option to control the distortion number, the distortion graph, the signal select, the guidance
compass, and the peak hold. Check an option to activate it and uncheck an option to deactivate it.
20