My Preset State Menu; About T-5000 Menu; Sheath Fault Locating (Sfl) Optional Accessory A-5000 - Amprobe AT-5000 Mode D'emploi

• Push Select to activate the desired setting. The transmitter automatically returns to the operational display screen.

My Preset State Menu

The T-5000 My Preset State allows the operator to return the transmitter's operational conditions to the configured and saved
preset state by selecting – No or yes.
The My Preset State feature is configured using the three-button navigational keypad.
• Push the left/right arrows to select the desired setting.
• Push Select to activate the desired setting. The transmitter automatically returns to the operational display screen.

About T-5000 Menu

The About T-5000 menu allows the operator to view the transmitter's serial number, hardware, and firmware information.
• Push Menu to return to the previous screen.

Sheath fault Locating (SfL) optional Accessory A-5000

The Sheath Fault Locating (SFL) feature is available in Direct (Conductive) Connection mode only.
• Push the SFL button,
Frequency selection is not configurable through the frequency menu screen.
Frequency selection: 9.82 kHz or 82 kHz, is activated by pressing the frequency button,
The active frequency is displayed on the operational display screen.
, to activate operation.
15
.