Specific Absorption Rate (Sar) - Crosscall CORE-M4 Mode D'emploi

FREQUENCY BAND AND POWER
• Frequency band used by radio equipment: certain bands may not be available in
all countries or all regions. Please contact the local operator to get more detailed
information.
• Maximum radio signal frequency emitted in the frequency band where the radio
equipment operates: The maximum power for all the bands is less than the highest
specified limit value under the associated harmonised standard. The nominal frequency
band and power transmission limits (radiated and/or by conduction) applicable to this
radio equipment are the following:
Bands Frequency
GSM900 880MHz-915MHz
GSM1800 1710MHz-1785MHz
WCDMA B1t 1920MHz-1980MHz
WCDMA B5 824MHz-849MHz
WCDMA B8 880MHz-915MHz
LTE B1 1920MHz-1980MHz
LTE B3 1710MHz-785MHz
LTE B5 824MHz-849MHz
LTE B7 2500MHz-2570MHz
LTE B8 880MHz-915MHz
LTE B20 2010MHz-2050MHz
LTE B28 2570MHz-2620MHz
LTE B38 2300MHz-2400MHz
Bluetooth 2402MHZ-2480MHz
Bluetooth LE 2402MHZ-2480MHz
802.11 a/b/g/n/ac
2412MHZ-2472MHz
(HT 20/40/80)
5150MHZ-5250MHz
5250MHZ-5350MHz
5470MHZ-5725MHz
5725MHZ-5850MHz
NFC 13.56MHz
maximum power
32.02 dBm
29.85 dBm
23.71 dBm
24.26 dBm
23.97 dBm
24.12 dBm
24.35 dBm
24.12 dBm
24.14 dBm
23.86 dBm
24.39 dBm
24.66 dBm
23.87 dBm
9.72 dBm
5.51 dBm
17.81 dBm
11.38 dBm
11.21 dBm
11.66 dBm
13.16 dBm
-22.69 dBuV/m
68
ACCESSORIES AND SOFTWARE INFORMATION
We recommend that you use the following accessories:
ACCESSORY MODEL
Trademark : Crosscall
Model :
CSCM4CM4GO.BK.EU
Crosscall ref:
EP.CORE.BK.2019
Crosscall ref:
CABL.COM4.GO.BU
The product software version is L1501.X.XX.XX.XXXX (where X=0 to 9, A to Z, representing
updates to the user experience, security patches, etc.). Software updates are published
by the manufacturer to correct bugs or improve features after the product launch. All the
software versions published by the manufacturer have been verified and always comply
with the applicable regulations.
Not all the radio frequency settings (for example the frequency band and output power)
are accessible by the user or can be modified by him/her. The latest information relating
to accessories and software is available in the Declaration of Conformity, which can be
viewed on the website:

SPECIFIC ABSORPTION RATE (SAR)

• This device complies with the directives relating to radio frequency exposure, when it
is used near the head or at a minimum distance of 5mm from the body. According to
ICNIRP guidelines, the SAR limit is 2.0 watts/kg for head and body, and 4.0 watts/kg for
limb on average for 10g of cellular tissue absorbing the majority of frequencies.
Maximum values for this model:
• SAR Head: 0.72 (W/kg) ==> authorised limit value: 2 (W/kg)
• SAR Body: 1.32 (W/kg) ==> authorised limit value: 2 (W/kg)
• SAR Limb: 3.43(W/kg) ==> authorised limit value: 4 (W/kg)
CORE-M4 , designed in France and assembled in China
Created and imported by: CROSSCALL – 245 RUE PAUL LANGEVIN 13290 AIX EN Pce –
France
Please visit the www.crosscall.com website to get the complete version of the user guide.
TECHNICAL DATA
Input voltage : 100-240V~
Input AC frequency : 50/60Hz
Output voltage : 5.0V
Output current : 1.0A
Output power : 5.0W
Average active efficiency : 73.82%
Efficiency at low load (10%) : --
No-load power consumption
0.084W
IPX4
USB / USB-C
69
: