About Your Phone; Getting Started Installing The Sim Card; Switching The Phone On And Off; X-Link Tm - Crosscall CORE-M4 Mode D'emploi

ABOUT YOUR PHONE

Device overview
1
12
11
2
3
10
4
5
5
6
7
8
9
1. Loud speaker
2. 2MP front-facing camera
Volume button +/-
3.
On/Off button
4.
X-BLOCKER notches
5.
Programmable key no. 1
6.
Microphone
7.
Space for the strap
8.
USB type-C port
9.
Programmable key no. 2
10.
How to install a strap*
*strap not included
**by Magconn Technology
13
18
11. SIM card or micro-SD card insertion tray
12. Light sensor
Earphone jack (waterproof cap – always
13.
keep it properly closed!)
12 MP camera
14.
Flash
15.
X-LINK (mount / charge / data transfer)
16. TM**
Loud speaker
17.
USB Type-C (waterproof cap – always keep
18.
it properly closed!)
42
GETTING STARTED
Installing the sim card
1. Check that your device is turned off
If not, turn the power off by pressing the On/Off button
2. Open the SIM tray using the SIM eject tool provided
a.Take the tool provided
14
b.Insert it into the hole, as shown below, to eject the SIM tray from its housing.
15
16
3. Pull out the tray completely with the metal side facing upwards
4. Insert the SIM cards
a. Insert the SIM card, face down, in the smallest compartment
17
b. If you wish, insert a second SIM card (or an SD card up to 128GB), face down, in the
biggest compartment.
5. Insert the tray back in the phone
a.Check that the cards are properly aligned.
b.Check that the tray is properly aligned with the slot in the phone when you insert it.
c.Insert the tray and push it in, as indicated below.
Please note:To ensure that your smartphone is watertight, make sure that the tray is
completely inserted and locked.

SWITCHING THE PHONE ON AND OFF

43