X-Sensors Application; Programmable Keys; X-Safe - Crosscall CORE-M4 Mode D'emploi

1. Press this button to turn on or lock the screen.
2. Press and hold this button to turn the device on and off.
3. Simultaneously press this button and the Volume «-» button to take a screenshot.
Switching on the phone
Press and hold the on/off button and wait a few seconds until the display turns on.
When you switch on your phone for the first time or after performing a data reset, follow
the on-screen instructions to set up your device.
Switching off the phone
Hold down the on/off button until the pop-up menu appears, then select
THE STRENGTHS OF THE CORE-M4
X-LINK
TM*
THE SMART MAGNETIC ATTACHMENT SYSTEM
This magnetic connector on the back of your smartphone can be used to attach and
connect your smartphone to exclusive X-LINK
This connector can be used for charging (1A) and/or data transfer using the OTG (On The
Go) feature (once attached to the compatible accessories)
X-BLOCKER
In situations that require maximum hold, this exclusive accessory supplied with your
CORE-M4 guarantees that your smartphone will be securely attached to compatible
accessories. It is easily attached to the slots on the side of your mobile. The siliconised
coating reduces vibrations caused by shocks.
Before starting any activity, check that the X-Blocker is perfectly engaged in both slots
of the phone
Discover the full range of accessories compatible with the X-LINK
www.crosscall.com
*by Magconn Technology
to turn it off.
accessories.
TM*
and X-BLOCKER on
TM*
44
THE X-SENSORS APPLICATION
When opening the application (app) for the first time, please read the terms and conditions
of use and click on "Accept" to accept them before using the app.
This app gives you information about the sensors embedded in your mobile.
The magnetometer: This is the compass feature. It measures the phone's orientation
relative to magnetic north. Calibrate your compass by following the instructions on the
screen.
The accelerometer: lets you measure and see the phone's acceleration based on 3 axes.
Using mathematical integration, it measures the speed at which the device is moving as
well as tracking its position.
GPS: position of the device and accuracy of the GPS signal. You can find out the number
of satellites in range as well as your exact position.
Proximity sensor: turns off the screen during phone calls when the phone is placed
near the ear.
Light sensor: measures the light reaching the phone screen.
Bluetooth (4.2) and networks (2G, 3G, and 4G): show the presence and strength of
communication networks.
Battery status: provides an instant, visual indication of the battery's rate of charge/
discharge.

PROGRAMMABLE KEYS

In Settings > Buttons > choose the function you want to give those keys. For each button,
choose the « press action » and « press mode ».
By default, the grey key is programmed to launch photo app and the red key is programmed
to launch X-SAFE app.

X-SAFE

X-SAFE is an application embedded in the Crosscall 's smartphone allowing to
alert someone in case of emergency.
STEP 1 : X-SAFE SETTINGS
1. Open X-SAFE application
45