Adding A User; Battery; Charging The Battery; Power Saving Mode - Crosscall CORE-M4 Mode D'emploi

Adding a user

In the notifications bar, by clicking on the
Your interface can then be personalised, and you can select appropriate apps for that
account (games for children, account for work, etc.)
BATTERY STATUS
Talk time: 17h
Standby time: 382 hours
GPS time*: 7h
*GPS + DATA + GOOGLE maps enabled + 100% Screen brightness
N.B. Battery consumption can be influenced by the quality of the network, the brightness
of the screen, the connections enabled (WiFi, Bluetooth, NFC), location services, etc.

Charging the battery

Be sure to fully charge your device before first use using the AC charger supplied.
Never charge your phone using the X-LINK
connection at the same time, or it may shorten the life of your phone's devices.
1. Open the dust plug and connect the USB cable to the USB power adapter, then plug
the end of the USB cable into the USB port.
2. Plug the USB power adapter into an electrical outlet.
3. When the battery is fully charged, unplug the phone from the charger. First unplug the
charger from the device, then unplug it from the electrical outlet.

POWER SAVING MODE

This feature limits your phone's performance to basic functions (calls, SMS/MMS, internet
and SOS + 4 programmable functions). It disables wifi, bluetooth and mobile data to save
battery life. The screen changes to black and white to reduce power consumption.
Accessible and configurable via:
Use the shortcut in the notification bar (by swiping from the top to the bottom of the
screen), on the second page, > Power saving mode.
icon, you can open a "guest" account.
TM* magnetic connection and the USB
50
To disable the Power saving mode, click on
Or via the pop up once the battery life goes
under 20%

BATTERY SAVER MODE:

This mode is less restrictive than the "Power saving mode". It dims the screen of your
phone and limits CPU performance to conserve battery power.
Accessible via the notification bar (by swiping from the top to the bottom of the screen),
icon battery saver.
To disable this mode, press the same icon again. If you hold down this icon for a few
seconds, you will see information about your battery status.

Tips and precautions for charging your battery

The battery is built into the phone and is not removable. Do not remove the battery
yourself.
• Use only approved chargers, batteries and cables. Using unapproved chargers or cables
may cause the battery to explode or damage the phone.
• Avoid using your phone while charging. Do not cover your phone or the power adapter.
• Incorrect charger connection could seriously damage your phone. Any damage caused
by misuse is not covered by the warranty.
• If the AC power is lower, your phone may take longer to charge.
• If you use unconventional chargers such as computers, the charging time may be longer.
• Please charge the battery before using the phone for the first time and unplug the
charger immediately after the first charge is complete.
• Remove the charger from the electrical outlet when the phone is not charging.
• The phone may not switch on straight away if you are charging a drained battery. Once
the phone has been charging for a while, the phone will start normally.
• The charging time may vary depending on the ambient temperature and the remaining
battery level.
• The phone can be safely charged at a temperature between 0°C and 40°C. Charging
> Disable Power saving mode.
51