Controls; Using The Controls - ROBBE Compact 6S EQ Duo Power Notice D'utilisation

3. THE CONTROLS
Battery sockets
3.1

USING THE CONTROLS

The four buttons on the Compact 6S EQ Duo Power are multi-purpose controls, as indi-
cated by the printed legends. Pressing the buttons performs different actions depen-
ding on the selected mode of operation.
'-' / MODE / AUTO BUTTON
• In Manual mode and Set-up mode this button is used to reduce the value of the
selected charge parameter by one increment; in Menu Select mode it selects the
previous menu.
• By pressing the 'MODE' button you can select the desired process (CHARGE,
DISCHARGE or DISCHARGE - CHARGE) directly before the start.
• When the power supply has been connected, this button is used in the Select menu
to activate "Automatic mode" (AUTOMA.).
'+' / START / MAN BUTTON
• In Manual mode and Set-up mode this button is used to increase the value of the
selected charge parameter by one increment; in Menu Select mode it selects the
next menu.
• Pressing the 'START' button initiates the selected process, e.g. CHARGE.
• When the power supply has been connected, this button is used in the Select menu
to activate "Manual mode" (MANUAL).
• The 'INC' button is also used to select a language. Holding INC pressed in while
connecting the charger to the power source takes you to the Language Select
menu.
Operating instructions
Compact 6S EQ Duo Power
Screen
Voltage Sensor
socket
Menu control
buttons
BID socket
6
Order No.
8506
Power
supply