Connecting The Battery; Automatic Mode; Menu Structure, Automatic Mode - ROBBE Compact 6S EQ Duo Power Notice D'utilisation

5.2

CONNECTING THE BATTERY

Important !!! Before connecting a battery it is absolutely essential to check one last time
that you have set the parameters correctly. If the settings are incorrect, the battery may
be damaged, and could even burst into flames or explode. To avoid short-circuits bet-
ween the banana plugs, always connect the charge leads to the charger first, and only
then to the battery. Reverse the sequence when disconnecting the pack.
Equalizer socket:
The voltage sensor lead attached to the battery must be connected to the charger with
the black wire aligned with the arrow marking. The arrow indicates the Earth (negative)
terminal. Take care to maintain correct polarity! (wiring diagram: see page 10.)
6.

AUTOMATIC MODE

'MODE'
button
'MODE'
button
'MODE'
button
'MODE'
button
'MODE'
button
'MODE'
button
Operating instructions
Compact 6S EQ Duo Power
If you press the 'AUTO' button from the Start screen,
the charger works in automatic mode, in which
case all the parameters are optimised automatical-
ly.
6.1Menu structure, automatic mode (NC and
NiMH only)
'START'
button
'START'
button
'START'
button
'START'
button
'START'
button
'START'
button
9
Order No.
8506