Terminating A Charge / Discharge Process; Displaying Charge / Discharge Data - ROBBE Compact 6S EQ Duo Power Notice D'utilisation

During a charge or discharge process the essential data for this process is stored on the
chip / KEY.
10.

TERMINATING A CHARGE / DISCHARGE PROCESS

The processor always employs the ideal process by taking the charge parameters into
account, with the result that the unit automatically terminates the charge or discharge
process exactly at the right moment. The charger always employs the optimum process
for each battery type.
10.1

DISPLAYING CHARGE / DISCHARGE DATA

Status display
flashing 'F' (finish)
Actual battery
voltage
Battery type
Operating instructions
Compact 6S EQ Duo Power
First connect the BID chip / KEY to the charger
using the adaptor lead. This automatically causes
the screen display shown here to appear.
If the charge parameters on the chip are accepta-
ble, press the 'ENTER' button to prepare the pro-
cess. From this point on, the procedure is identical
to a normal process initiated from a battery memo-
ry; the sequence is described in Chapter 7.4.
Charged-in
Elapsed char-
or dischar-
ge / dischar-
ged capacity
ge time
Charge /
discharge
current
During a charge or discharge process the
values for that process are constantly
shown in the working display (see Chapter
5.1).
If the process concludes successfully, the
charger alerts you with an audible beep.
The screen now displays the essential
data relating to that process, as shown in
the adjacent illustration.
19
Order No.
8506