Controls; Description Of Controls - ROBBE Power Peak QUAD EQ-BID Notice D'utilisation

3.

cONTROLS

Voltage sensor
connection
3.1

DEScRIPTION Of cONTROLS

As indicated by the labelling, the 4 operating buttons on the Power Peak ® Quad EQ-BID
have several functions. The buttons trigger different actions in different operating situati-
ons.
MODE / AUTO / „-" -BUTTON
• In manual mode this button is used to reduce the values of the charging parameters by
one during set-up and select the previous menu in the menu selection.
• The required operation (CHARGE, DISCHARGE or DISCHARGE->CHARGE) can be
pre-selected with the MODE button.
• After connecting to the supply voltage, this button is used to activate "automatic mode"
(AUTO.) in the selection menu.
'+' / START / MAN BUTTON
• In Manual Mode- during set-up, this button is used to increase the value of the charge
parameter by one and select the next menu in the menu selection.
• The START button is pressed to start the selected operation, e.g. CHARGE.
• After connecting to the supply voltage, this button is used to select "manual mode"
(MANUAL) in the start screen selection menu.
• The '+' button is also used to select the required language. The language selection
menu is accessed by pressing the '+' while connecting the supply voltage.
Operating Instructions
Power Peak ® Quad EQ-BID
Display
Battery connection (red=„+", black="-")
Menu control
buttons
BID-
connection:
6
Order No.
8565