Set-Up Display; Settings In Manual Mode - ROBBE Compact 6S EQ Duo Power Notice D'utilisation

'+'
button
'+'
button
'+'
button
7.2

SET-UP DISPLAY

For each charge or discharge parameter there is a separate set-up menu with an asso-
7.3

SETTINGS IN MANUAL MODE

The following settings have to be entered manually before a charge or discharge process
can be started in manual mode; this ensures that the charger is able to work through the
process efficiently when in this mode:
• Battery memory
• Battery type
• Cell count
• Battery capacity (or battery voltage for LiPo, LiIo, LiFe and Pb)
• Charge current
• Discharge current
• Beeper (OFF, 1 - 5)
Note:Only values in the first line can be changed when the arrow symbol is flashing.
Operating instructions
Compact 6S EQ Duo Power
'ENTER'
button
'ENTER'
button
ciated screen display. You first have to select the
parameter to be changed using the '+' or '-' button;
the corresponding line is indicated with an arrow at
the right-hand margin. Pressing the 'ENTER' button
starts the set-up procedure. At the right-hand mar-
gin you will see an alternating '+' and '-' symbol;
using the '+' or '-' buttons you can now enter a new
value for that parameter. Press the 'ENTER' button
to conclude the setting process. The sequence of
screen displays reproduced here is a typical exam-
ple, and shows the method of altering the charge
current.
'+'
button
12
Order No.
8506
'ENTER'
button