Using The Wall Mount Bracket; Removing The Base Unit From The Wall Bracket; Removing The Wall Mount From The Base Unit - Motorola SD4590 Guide De L'utilisateur

Using the Wall Mount Bracket

1 Place the wall mount bracket on the base as
illustrated.
2 Slide the bracket forward gently until it clicks
into place.
Follow the directions below if you decide to remove the
wall mount.

Removing the Base Unit from the Wall Bracket

Push the base unit up until it is clear of the screws on the
telephone jack.

Removing the Wall Mount from the Base Unit

Push down on the wall mount to remove it from
the phone.
6