Vortice VORT PROMETEO PLUS HR 400 Notice D'emploi Et D'entretien page 16

ENGLISH
SET button (fig.4)
4 4
DISPLAY
SET
Sets the following parameters. To move from one
parameter to the next, press NEXT.
Time/day setting (fig. 4a):
4a 4a
• press SET to view the parameter;
• set the value of the flashing field with the + and -
keys; the sequence will be: HOURS, MINUTES,
DAY.
16
AUTO
Su
TIMER MODE
NEXT ENTER
Temperature setting (fig. 4b):
4b 4b
• to view the parameter, press: SET and NEXT
(several times);
• set the value of the flashing field with the + and -
keys; the sequence will be: C/F (unit of
measurement, °C for degrees Celsius, F for
degrees Fahrenheit), internal T value (from 15°C to
30°C, in steps of 1°C).
Relative humidity setting (fig.4c):
4c 4c
• to view the parameter, press: SET and NEXT
(several times);
• set the value of the flashing field with the + and -
keys (from 40% to 90%, in steps of 5%).
°C
RH(%)