Meister WS500-115M Mode D'emploi page 58

• Always store and handle grinding
disks carefully in accordance with the
manufacturer's directions.
• Check disks before using them. Never
use chipped, cracked or otherwise
damaged products.
• Ensure that grinding tools are mount-
ed according to the manufacturer's
directions.
• Always use spacers or shims if these
are supplied with the grinding tool or
if they are specified.
• Ensure that the grinding tool is cor-
rectly mounted and secured before
starting work. Allow the machine
to run for 30 sec. in a safe position
beforehand. Stop work immediately if
unusual vibrations occur or other defi-
ciencies are noticed. In such a case,
check the machine carefully to deter-
mine the cause.
• Never use separate reducing sleeves
or adapters to fit grinding disks with
large holes.
• With grinding tools with thread insert,
ensure that the thread is long enough
to take the full length of the spindle.
• Ensure that flying sparks do not cause
danger, e.g. to other persons or by
igniting inflammable substances.
• During dusty work, ensure that the
ventilation slits are kept free. If dust
has to be removed, first disconnect
the power tool from the power sup-
ply. Use non-metallic objects and
avoid damaging interior parts of the
machine.
58
5405070-Winkelschleifer-man.indd 58 5405070-Winkelschleifer-man.indd 58
• The disk continues to run after the
machine is switched off. Do not lay
the machine aside until the disk has
come to rest.
• Always protect eyes and ears.
• Other personal safety equipment, e.g.
dust mask, gloves, helmet and clothing
(e.g. apron) should also be worn.
This unit may not be used by people
(including children) with reduced phys-
ical, sensory or mental capacities, with
a lack of experience and without the
appropriate knowledge, unless they are
supervised by someone who is respon-
sible for their safety or have been
instructed by such a person with regard
to how the unit is to be operated. Chil-
dren should be supervised to ensure
that they do not play with the device.
Safety symbols
The symbols on the housing have the
following meanings:
Do not dispose of with
domestic waste!
Important! Observe operat-
ing instructions!
Wear goggles.
Use ear defenders
Wear a dust protection mask.
22.10.20 10:52 22.10.20 10:52