Installation - Vortice MICROCOMFORT T Notice D'emploi Et D'entretien

ENGLISH
Product structure:

Installation

Installation instructions for wall mounting:
The product could be wall mounted with wall mounted components, Heater is to be installed so that switches
and other controls cannot be touched by a person in the bath or shower.
Please make sure the distance can meet the requirements as below image, (The ground distance should be
1.3meter; the sidewall distance should 0.8 meter; the top distance barrier 0.5 meter )
20
1. Upper cover
2. Left bracket
3. Decorative cover
4. Towel rack,
5. Air grill,
6. Control panel,
7. Middle frame,
8. Right bracket,
9. Decorative cover,
10. Power cord,
11. Wall bracket,
12. Rear grille,
13. Bottom cover,
14. Foot pad,
15. Remote control