Functions - Vortice MICROCOMFORT T Notice D'emploi Et D'entretien

ENGLISH
Correct installation method:
Press the towel rail down as indicated by the arrows
Connect the product plug to the electrical outlet and press the ON / OFF button.

Functions

Simple functions
Simple function refers to the mode in which the weekly timing is not turned on. Under simple function, power,
temperature, window detection and timing can be adjusted.
After plugging in the power supply, the buzzer beeps twice, the heater enters the standby state, and the digital
tube displays "SS".
Note 1: In standby mode, the mode button, window button, and weekly timer button are invalid, and the
temperature can't be set.
Note 2: The buttons on the remote control and on the heater are used in the same way.
Note 3: The default shutdown time is 12 hours after power-on.
Continuous mode
Continuous mode refers to selecting a mode and keeping the operation in this mode.
a) When the power is turned on for the first time, the heater enters standby mode. Press " " to start the device
and enter weak hot air mode by default. The digital tube displays "CO", the indicator " " turns on, and all other
functions are off.
b) Press the level button " " repeatedly to cycle through the level and indicator in the following sequence:
Weak hot air Strong hot air Cold air
If the heater is restarted without turning off the power, it maintains the previous state.
Note 1: When switching from weak hot air to strong hot air, the strong PTC will be delayed by 10S.
Note 2: After the hot air PTC is turned off, the fan will be turned off after 30 seconds.
Note 3: The operation continues when the level is selected. In continuous mode, the device will automatically
shut down after 12 hours of continuous operation.
23