Description And Operation; Warning; Caution; Installation - Vortice Thermologika Design Notice D'emploi Et D'entretien

ENGLISH

Description and Operation

Thermologika Design is a wall mounted, infrared,
auxilliary heating lamp. It is ideal for domestic and
commercial use, particularly where heat is required
virtually instantly, and in rooms open towards the
outside.
Thermologika Design functions on the principle of
irradiation (just like the sun's own rays). The
appliance's infrared rays directly heat the objects
they reach.
Since Thermologika contains no moving parts, it is
exceptionally silent during operation.
A pull-cord switch turns the appliance on and off and
also selects the heating power.
Lamps can be turned on using remote switches.

Warning:

!
this symbol indicates that care must
be taken to avoid injury to the user
• This appliance has
manufactured for
performance, but correct operation and regular
maintenance are essential to ensure a long working
life and electrical and mechanical reliability.
• Do not use this appliance for functions other than
those described in this booklet.
• After removing the appliance from its packaging,
ensure that it is complete and undamaged. If in
doubt contact Vortice**. Do not leave packaging
within the reach of children or infirm persons.
• Do not sit or place objects on the appliance.
• Certain fundamental rules must be observed when
using any electrical appliance:
- Never touch electrical appliances with wet or damp
hands.
- Never touch electrical appliances while barefoot.
- Never allow children or infirm persons to operate
appliances unattended.
• This appliance is not suitable for use by children or
by individuals with reduced physical, sensorial or
mental capacities or by inexperienced or untrained
individuals, unless they are supervised or instructed
in its use by a person responsible for their safety.
Children must always be supervised to ensure that
they do not play with the appliance.
• Do not operate the appliance where inflammable
vapours are present (alcohol, insecticides, petrol, etc.).
• If the appliance is no longer to be used, switch it off
at the mains, disconnect it and store it out of the
reach of children and infirm persons. Also cut off the
power cable to render the appliance unusable.
• Do not use the appliance near a bath, shower or
swimming pool. Always respect the minimum safety
distances established by CEE-CEI standards as
shown in fig. 1/2.

Caution:

!
this symbol indicates that care must
be taken to avoid damaging the appliance
• The appliance can become very hot during use.
Avoid touching the appliance's hot surfaces with
6
been designed
maximum reliability
your bare skin. Switch the appliance off and wait at
least 5 minutes before performing any work on it.
• Do not make modifications of any kind to this
appliance.
• Take particular care if the appliance is used in
unsupervised environments.
• Do not expose this appliance to the weather (rain,
sun, etc.).
• Regularly inspect the appliance for visible defects. If
any faults are found, do not operate the appliance;
contact Vortice** immediately.
• Never position the appliance directly under a power
socket.
• The appliance must be correctly connected to an
electrical supply that conforms to applicable
standards and is equipped with an efficient earth
connection. If in doubt, have a qualified electrician
perform a thorough check.
• The appliance must be installed by a professionally
qualified electrician only, and in compliance with the
instructions given in this booklet. Incorrect
installation and/or electrical connections can lead to
injury to persons or animals or other damage for
and
which Vortice cannot be held responsible.
and
• Use a multi-polar switch with minimum contact gaps
of 3 mm to install the appliance.
• The electrical power supply/socket to which the
appliance is connected must be able to provide the
maximum electrical power required by the
appliance.
• Switch off the appliance at the installation's main
switch before cleaning or maintaining it.
• Should the appliance be dropped or suffer a heavy
blow, have it checked by Vortice immediately.
• If the appliance does not function correctly or
develops a fault, contact Vortice** immediately.
Ensure that only genuine original Vortice spares are
used for any repairs.
• Switch off the appliance at the main switch: a) if the
appliance does not function correctly; b) before
cleaning the outside of the appliance; c) if the
appliance is not to be used for a long period of time.
• Never cover or block the radiating element grille.
• Keep the radiating element grille clean.
• To avoid all risk of fire, never install the appliance
with the radiating elements near or pointing towards
curtains, beds or any other flammable materials. Keep
the appliance at least 1 metre from any other surface.
• Do not operate the appliance by means of
programmers, timers or other automatic switching
devices.
• The appliance's grille has been design to prevent
direct access to the radiating elements. Never
operate the appliance without the grille.

Installation

Fig. 3 ÷ 26.
NB
two types of electrical connection are possible:
for pull cord operation: fig. 21 (wiring diagram: fig. 23
A)
for external remote switch operation: fig. 22 (wiring
diagram: fig. 23 B)
NB