Télécharger Imprimer la page

Rösle 25448 Mode D'emploi page 10

Baladeuse led universelle bbq

Publicité

Les langues disponibles

Les langues disponibles

4.3 ATTACHING THE HANDLE LIGHT TO THE LID HANDLE
5. HANDLING
5.1 SWITCHING ON, SWITCHING OFF, AUTO MODE
The pushbutton allows you to switch between three different modes:
ON
Normal operation
3
AUTO
AUTO-mode (brightness and motion sensor)
3
OFF
Off
3
When you switch the handle light on, it is automatically in normal operation/normal
operating mode. If you press the button again, the AUTO mode is activated. The LED
lamp briefly flashes twice, indicating that the brightness and motion sensor is active.
To switch the device off, press the ON/AUTO/OFF button again. The light then flashes
again, indicating that the light is switched off.
5.2 AUTO MODE
The RÖSLE LED handle light features an AUTO mode. Thanks to the brightness and
motion sensor integrated in the handle light, the brightness in the surrounding area and
the movements of the lid are automatically monitored. Once it gets dark enough, and
when the lid is opened, the light switches on automatically. This function offers maximum
convenience with regard to lighting when the grill is used. It also prolongs the service life of
the device.
6. CHANGE BATTERY
When replacing batteries, always use batteries of the correct type and
model number (see "Technical data"). Replace dying batteries without delay.
Clean battery contacts and device contacts before inserting.
1. Make sure that the handle light is switched off.
2. Remove the fastening screws with a suitable tool and remove the cover of the battery
compartment.

Publicité

loading